Sharp AR-C200P - Manual (Page 42)

Sharp AR-C200P: Setting up • 42
.
Test Print Menu
Item Value Description
PRINT ID CHECK PATTERN
Execute Prints ID check pattern to detect bad
ID.
Displayed only if "TEST PRINT
MENU" of the System Maintenance
Menu is set to ENABLE.
Shutdown Menu
Item Value Description
SHUTDOWN START
Execute Printer shut down sequence which
prevents loss of data from the hard
disk drive. Appears only when the
hard disk drive is installed.
Print Menu
The default settings are bold face.
Item Value Description
COPIES
1 to 999 Sets the number of copies.
DUPLEX
On; Off Specifies two-sided (duplex) printing
if the optional duplex unit is installed.
BINDING
Long edge; Short
edge Sets binding for duplex printing. Only
displayed if duplex is ON.
PAPER FEED
Tray 1; Tray 2; Tray 3;
MP Tray Selects source of paper feed. Tray 2
and 3 only displayed if installed.
AUTO TRAY
SWITCH
On; Off Automatic switching to next tray
when tray in use empties.
TRAY SEQUENCE
Down; Up; Paper
feed tray Specifies selection order priority for
switching Auto Tray Select/Auto Tray
Switch.