Sharp AR-C200P - Manual (Page 26)

Sharp AR-C200P: Setting up • 26
4. For face down printing, make sure the rear paper exit is closed
(the paper exits from the top of the printer). Paper is stacked in
printed order and the paper tray capacity is approximately 500
sheets, depending on paper weight.
5. For face up printing, make sure the rear paper exit is open and
the paper supports are extended. Paper is stacked in reverse
order and tray capacity is approximately 100 sheets, depending
on paper weight.
6. Load letterhead paper face down as shown for both portrait and
landscape:
CAUTION!
Don’t open or close the rear paper exit while printing, as it
may result in a paper jam.
NOTE
Always use the face down (rear) stacker for thick paper (card
stock, etc.)