Savin C4540 - Manual (Page 41)

Using as a Windows Network Printer
33
1
H
Select the [Printer Name] check box to select the printer models you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
I
Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
J
Click [Port:], and then click [Add].
K
Click [Network Printer], and then click [OK].
L
Double-click the computer name you want to use as a print server in the
[Browse for Printer]
window.
M
Select the printer you want to use, and then click [OK].
N
Check that the port of the selected printer is displayed in [Port:].
O
Configure the user code as necessary.
For an RPCS printer driver, a user code can be set after the printer driver in-
stallation. For information about user code, see the printer driver Help.
P
Select the [Default Printer] check box to configure the printer as default.
Q
Click [Continue].
The printer driver installation starts.
R
After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Note
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
❒ Auto Run may not work with certain operating system settings. In that
case, launch “Setup.exe” on the CD-ROM root directory.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See “When a
Message Appears during Installation of the Printer Driver”, Trouble
Shooting.