Sony XCD-MV6 - Manual (Page 6)

Ov
e
rvi
ew
6
Location and Function
of Parts and Operation
Front/Top/Bottom
1 Lens mount (C-mount)
Attach any C-mount lens or other optical
equipment.
Note
The lens must not project more than 10 mm (13/32 inch)
from the lens mount.
1 Lens mount face 210 mm (13/32 inch) or less
2 Auxiliary holes (top)
3 Reference holes (bottom)
These precision screw holes are for locking the
camera module. Locking the camera module into
these holes secures the optical axis alignment.
For details, see “Dimensions” on page 33.
Rear
4 IEEE1394b connectors
Connect an IEEE1394b camera cable (not
supplied) to this connector.
5 8-pin I/O connector
When power from the IEEE1394b connector is
insufficient, power is supplied through this
connector.
1
2
3
3
Pin No. Signal Pin No. Signal
1 TPB– 6 VG
2 TPB+ 7 NC
3 TPA– 8 VP
4 TPA+ 9 TPBG
5 TPAG
Pin No. Signal Pin No. Signal
1 Trigger IN 5 GPI1 IN
2 Strobe OUT 6 Power GND
3 GPO1 OUT 7 Power IN
4 GPI2 IN 8 GPO2 OUT