Sharp Aquos LC 45GD5U - Manual (Page 6)

6
QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
It’s best to use 2 people to remove the AQUOS television for stability.
1. Use the cardboard holders on either side of the AQUOS television to remove it
from the box.
2. Remove the cardboard; however, keep the wrapping on the AQUOS television to
protect it while moving.
3. Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your AQUOS television in a well ventilated area and make sure not to place it by a
heat source or use near water. The AQUOS television is designed for AC use only and
should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently
wipe and avoid pressing on the screen. To clean the outer cabinet, use the same
method. Do not use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
1. Facing the back of the AQUOS television, remove
the terminal cover.
Press down the
upper hooks to
remove the cover
toward you.
2. Attach your antenna to the back of the TV. (See
page 17.)
3. Connect the AC plug for the AQUOS television
into the wall outlet.
5. How to turn on the AQUOS television for the first
time.
A) Press
POWER on AQUOS television.
POWER
B) POWER indicator on the front of the AQUOS
television lights blue.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
4. Bundle the cords properly with a cable clamp and
cable tie, and close the terminal cover.
NOTE
• The TV can be swiveled 5 degrees right and left with TV
stand attached.
• You cannot tilt the screen vertically.
POWER indicator