Samsung SCC-C4339P - Manual (Page 31)

English _31
English
CTRL TYPE
By inputting the wire remote port, you may set up the A, B, C or D mode.
Code
Tele Wide Far Near
A -6V +6V +6V -6V
B -6V +6V -6V +6V
C +6V -6V +6V -6V
D +6V -6V -6V +6V
COMMUNICATION
You can set the RS-485 communications setting in regard of the camera.
Select
Select each item and set appropriately.
PROTOCOL, BAUD RATE, ADDRESS :
You can manually set the protocol, baud
rate and address.
SYSTEM INFO
You can check the system information.
Select
The current system information is
displayed.
1.
2.
3.
1.
2.
W COMMUNICATION X
RS485 RS485
PROTOCOL
SAMSUNG PROTOCOL SAMSUNG
BAUD RATE
9600 BAUD RATE 9600
ADDRESS 0 ADDRESS 0
W SYSTEM INFO X
TYPE 4_34 ZOM_WDR_P TYPE 4_34 ZOM_WDR_P
PROTOCOL SAMSUNG PROTOCOL SAMSUNG
ADDRESS
0 ADDRESS 0
COMM. TYPE
RS485, HALF COMM. TYPE RS485, HALF
BAUD RATE 9600 BAUD RATE 9600
SERIAL NO. 000000000000000 SERIAL NO. 000000000000000
CAMERA VER. v1.00 CAMERA VER. v1.00_ _00000 00000
SCC-C4239P-TRK-ENG.indd 31 SCC-C4239P-TRK-ENG.indd 31 2009-10-9 9:31:49 2009-10-9 9:31:49