Samsung SCC-C4339P - Manual (Page 22)

22_ setup
setup
If is set to , the MASK AREA function is not available.
EXT : The interface to an external alarm enables an automatic switch between
DAY and NIGHT mode.
If you use an infrared light source while in AUTO mode, this may cause a failure in
AUTO SWITCH or AUTO FOCUS.
WHITE BAL
If you need to adjust the color according to the ambient illumination, you can use the
function.
Illumination is generally referred to as color temperature, which is represented in a
measurement of kelvin (K). Color temperatures for ordinary lighting are as follows:
In the menu, you can
set a mode for correcting the BAL
>.
- ATW1,2 : If you set the
BAL > menu to or
mode, this will monitor
the change of the color temperature
to correct the as
needed.
The following color temperature
ranges are assured in individual
modes:
ATW1 : 2500K ~ 9300K ( 1)
ATW2 : 2000K ~ 10000K
(suitable to sodium light source) ( 2)
1 : With mode active in a color temperature environment ranging
beyond between 2500K and 9300K, a proper white balance value may not be
produced; if this is the case, you are recommended to use mode.
2 : With mode active in a mostly single color environment, the display
color and the actual one may differ; so select a mode as appropriate to your
color temperature environment.

M

Blue sky
Rainy
Cloudy
Sunny
Partly Cloudy
Fluorescent lamp
Halogen lamp
Tungsten lamp
Candlelight
10000K
9000K
8000K
7000K
6000K
5000K
4000K
3000K
2000K
1000K
SCC-C4239P-TRK-ENG.indd 22 SCC-C4239P-TRK-ENG.indd 22 2009-10-9 9:31:48 2009-10-9 9:31:48