beautypg.com

Sharp BD-HP25U User Manual

Page 44

background image

42

SETTINGS

Audio Video Settings

HDMI Video Out

This sets the resolution of the video output for the

HDMI terminal of this player.

Normally set to “Auto” (factory preset value).

Item
Auto, 1080p, 1080i, 720p, 480p

NOTE

• When the BD player is connected to a 1080p 24Hz

compatible TV and the “HDMI Video Out” is set to

“Auto”, 1080p 24Hz will automatically be displayed

when compatible discs are played back.

Secondary Audio

This toggles the clicking sound on the menu and

audio with secondary video in picture in picture

mode for BD-Video.

• Select “Off” when enjoying the high quality sounds of

BD-Video.

Item
On, Off

Audio Out

You can set the audio output when connecting to

SURROUND equipment.

1

This sets the audio output connected to

SURROUND equipment.

Item
HDMI Output: Select this when you connect using

HDMI OUT terminal.

Digital Output: Select this when you connect using

DIGITAL AUDIO OUT terminal (OPTICAL).

2

You can set the audio output mode for each

output terminal.

1 This sets the audio output mode for HDMI OUT

terminal when selecting “HDMI Output”.

NOTE

• When the secondary audio is set to “On”, PCM is

automatically selected as the audio output mode.

Item
Bitstream:

• Select this when connecting to HDMI equipment with

a built-in decoder for DOLBY DIGITAL, etc.

• Setting to Bitstream will output each audio signal by

Bitstream.

PCM (Surround):

• Select this when connecting to multi-channel HDMI

equipment.

• Setting to PCM (Surround) will output by LINEAR

PCM by decoding audio signals recorded in each

audio output mode such as DOLBY DIGITAL, DTS.

2 This sets the audio output mode for DIGITAL

AUDIO OUT (OPTICAL terminal) when selecting

“Digital Output”.

Item
Bitstream:

• Select this when connecting to SURROUND

equipment with a built-in decoder for DOLBY

DIGITAL, etc.

• Setting to Bitstream will output each audio signal by

Bitstream.

PCM:

• Select this when connecting to 2 channel stereo audio

equipment.

• Setting to PCM will output by converting each audio

signal into PCM 2 channel audio signal.

NOTE

• See page 54 for information on output of audio formats.