Sharp BD-HP25U - Manual (Page 26)

24
Before Starting Playback
Control Panel
This function allows you to operate this player using
the TV remote control by displaying the control
panel on the TV screen.
• To operate this function, connect this player to a TV
compatible with HDMI CEC (Consumer Electronics
Control) using an HDMI cable (See page 16). Make
sure that “Control Panel” is set to “Yes” (See page 43).
When the settings are completed, perform the following
operations.
NOTE
• The control panel may not be displayed depending on
the TV. Also, it may not be available depending on the
content.
• When operating using the remote control of the player,
the control panel does not appear.
• When playing video on demand streaming content
available with this player, the control panel cannot be
displayed.
1
Switch the TV input to the input source to which
this player is connected (HDMI input).
2 Press the PLAY button on the TV remote control.
• The control panel appears on the TV screen.
Control Panel
TOP MENU
TITLE LIST
FUNC.
POP-UP
MENU
PANEL
OFF
Select
Enter
• When there is no operation for approximately
10 seconds, the control panel disappears
automatically.
To display the control panel, press the PLAY button
on the TV remote control.
3 Press a/b/c/d on the TV remote control
to select the desired button icon, then press
ENTER.
• The function of the selected button icon is available.
Major functions of each button icon
POP-UP
MENU
• Display the pop-up menu screen for BD
video and the menu screen for DVD video.
TOP MENU
TITLE LIST
• Display the top menu screen for BD video
and DVD video.
FUNC.
• Display the Function Control screen for BD
video, DVD video, etc.
• Fast reverse (search).
• Play.
• Fast forward (search).
• Skip to the beginning of a chapter.
• Pause.
• Skip to the next chapter.
• Jump backward (approx. 10 seconds).
(This function is used when you want to re-
watch a scene that has just been shown.)
• Stop.
• Jump ahead (approx. 30 seconds).
PANEL
OFF
• Turn off the control panel.