Schneider Electric 170AMM11030 - Manual (Page 7)

31005009 01 November 2003 7
Analog Outputs The following table contains specifications for analog outputs.
Discrete Inputs The following table contains specifications for discrete inputs.
Number of Channels 2
Output Ranges ± 10 VDC
Resolution 14 Bit
Conversion Times 1.60 ms for all channels
Output Setting Time 3.2 ms to 0.1% of final value
Accuracy Max. error @ 25 °C ± 0.4% for -10 to +10 VDC
Linearity ± 1 LSB, Guaranteed Monotonic
Output Impedance < 0.2 Ohms
Maximum Output Current 5 mA
Maximum Temperature Drift @ 60 °C ± 100 ppm of full scale per °C
Data Format Left justified
Crosstalk Between Channels 80 dB
Load > 2K Ohms @ ±10 VDC
Channel to Channel Isolation 700 VDC
Operating Voltage 16 to 42 VDC
Absolute Minimum Voltage 12 VDC
Absolute Maximum Voltage 45 VDC
Number of Points 16
Number of Groups 1
Points per Group 16
Type of Signal True high (sourcing)
IEC 1131 I/O Type @ 24 VDC 1+
Minimum ON Voltage > 11 VDC
Maximum OFF Voltage < 5 VDC
Input Operating Current 1.2 mA and lower, off
2.5 to 10 mA, on
Input Voltage
Range 16 to +42 VDC
Surge 75 volt peak for 10 ms
Response Time 6.2 ms OFF to ON @ 24 VDC
7.3 ms ON to OFF @ 24 VDC