SMC Networks ETHERNET/IP EX9-AC -7 - Manual (Page 17)

30 31
Wiring ( continued )
Display
Output Block
PWR PWR
Power Block
The Power Supply Cable (for Power Supply Connector of Power Block) is a bypass
cable which can be used when
the Power Block is positioned next to
the SI Unit.
Option
EX500-AP 050 - S
How to order
Cable length (L) Connector specification
010 1 [m]
050 5 [m]
S Straight
EX9-AC 020 EN - PSRJ
How to order
Connector specification Cable length ( L )
020 2 [m] PSRJ M12 plug ( straight ) RJ45 connector
Spare Fuse (for Input Block)
EX9-FU 05
How to order
Rating ( A )
05 0.5A
Output Cable
For details, refer to subsection "Wiring" (page 26) of section "EX9 series Output
Block/Power Block" in this manual.
EX9-AC 010 -7
How to order
Cable length ( L )
010 1 [m]
030 3 [m]
Power Supply Cable (for power input connector of Power Block)
For details, refer to subsection "Wiring" (page 29) of section "EX9 series Output
Block/Power Block" in this manual.
EX9-AC 010 -1
How to order
Cable length ( L )
010 1 [m]
030 3 [m]
050 5 [m]
NOTE
Mount a Waterproof Cap on unused Power Supply Connector. The proper use of
Waterproof Cap can achieve IP67 Enclosure. (Tightening torque : 0.1N m for M12)
For Waterproof Cap, refer to "Option" (page 32) in this manual.
Display Description
0,1
Lights up Output corresponding to the number is ON.
Off Output corresponding to the number is OFF.
Display Description
PWR
Lights up External power supply is ON.
Off External power supply is OFF.
Ethernet Communication Cable
For details, refer to subsection "Wiring" (page 12) in section "SI Unit" in this manual.
Power Supply Cable
For details, refer to subsection "Wiring" (page 13) of section "SI Unit" in this manual.
EX9-AC 002 -3
How to order
Cable length (L)
002 0.2 [m]
Power Supply Cable (for power supply connector of Power Block)
For details, refer to subsection "Wiring" (page 29) of section "EX9 series Output
Block/Power Block" in this manual.
6