Siemens 5000 RSM - Manual (Page 77)

Using Other Functions
77
Step by Step
Change call number (relocate)
You can put your call number on every other available te-
lephone when it is set up (ask your service personnel).
Your previous telephone then receives the old call num-
ber of your new telephone. The call number together
with the settings (e.g. programmed keys) of the tele-
phone are changed.
Precondition: Your old and new telephone are the first
telephones at each connection. The telephone are in
idle state.
The following procedure is carried out on the new tele-
phone.
Press the key. The LED lights up.
Select and confirm.
or
qmhem
Enter the code.
o
Enter your own call number.
o
Enter code (telephone lock) Æ Page 71.
(This is not necessary if you have not determined a code
yet).
Confirm.
or
rmhem
Enter the code.
Program/Service
* 9419=Relocate?
Complete Relocate
If you exchange call numbers from different sys-
tem telephones, all programmed keys are re-
placed with the default assignment.
You can, however, connect your telephone to
another connection and carry out the procedure.