beautypg.com

Lubrication – Woodstock SHOP FOX W1754 User Manual

Page 27

background image

-25-

W1754 20" Planer With Mobile Base

M

A

IN

TE

N

A

N

CE

This planer uses sealed and pre-lubricated ball bearings

that require no lubrication.

The following is a list of parts that need lubrication:

Columns/Lead Screws: The four columns should be lubri-

cated monthly with SAE 30W oil. Unfasten dust covers to

gain access. The four lead screws (

Figure 17) should be

lubricated with general purpose grease once a month.

Worm Gear: The worm gear should be inspected monthly

and lubricated with general purpose grease when needed.

Remove the worm gear box to inspect. See parts diagram

on

Page 42 for location.

Chain: The table height adjustment chain (see Figure 24

on

Page 28) should be inspected monthly and lubricated

with general purpose grease when needed.

Gear Box: Gear box oil should be changed after the first

20 hours of operation (see

Figure 18). Inspect levels

periodically and change yearly. Replace gear oil more fre-

quently under heavy use. See

Page 14 for instructions on

adding oil.

Replace with 80W-90W gear oil. Fill until oil reaches the

top of the filler plug port for correct oil level.

Drive Chain: The drive chain should be inspected and

lubricated monthly. See Part 206 on

Page 45. Check

sprocket, chain and cotter pin during inspection. Use a

general purpose grease. Some chains will have master

links instead of cotter pins.

Feed Rollers: Regular lubrication of feed rollers is crucial

to the operation of your planer. Lubricate every 24-30

hours of use. Each end of each power feed roller has an

oiling port located on the top of the headstock (

Figure

19). Apply SAE 30W oil, making sure that the lubricant

penetrates the bearing.

Lubrication

OFF

SHOCK HAZARD!

Always disconnect power to the

machine before lubricating! Failure to

do this may result in serious personal

injury!

Figure 19. Feed roller lubrication

locations.

Oil

Figure 17. Example of columns and lead

screws (Shown with cover removed).

Figure 18. Gearbox oil drain/fill locations.

Fill Plug

Drain Plug

Column

Lead screw

OFF