Woodstock SHOP FOX W1754 - Manual (Page 25)

-23-
W1754 20" Planer With Mobile Base
M
A
IN
TE
N
A
N
CE
MAINTENANCE
Regular periodic maintenance on your SHOP FOX ®
Model W1754 will ensure its optimum performance. Make
a habit of inspecting your machine each time you use it.
Check for the following conditions and repair or
replace when necessary:
• Loose mounting bolts.
• Worn switch.
• Worn or damaged cords.
• Damaged V-belt.
• Any other condition that could hamper the safe
operation of this machine.
General
Disconnect power to the machine when
performing maintenance, assembly or
adjustments. Failure to do this may
result in serious personal injury.
OFF
Cleaning
Vacuum excess wood chips and sawdust, and wipe off the
remaining dust with a dry cloth. Protect the unpainted
cast iron surfaces on the table by wiping the table clean
after every use. Keep tables rust-free with regular appli-
cations of quality metal protectants.
Maintenance Schedule
For optimum performance from your machine, follow this
maintenance schedule and refer to any specific instruc-
tions given in this section.
Daily Maintenance:
• Clean the unpainted cast iron part of the table
• Lubricate feed rollers (see Page 25)
Monthly Maintenance:
• Inspect V-belt tension, damage, or wear (see Page
24)
• Lubricate four columns (see Page 25)
• Clean/vacuum dust buildup from inside cabinet and
off motor
• Lubricate worm gear (see Page 25)
• Lubricate drive chain (see Page 25)
Yearly Maintenance:
• Change gear box oil (see Page 25)