Samsung SF-5800P - Manual (Page 64)

2.31
Automatic Dialing
2
Operation
Storing a Group into a One-Touch Button
You can use a Group number as One-touch dialing. Before you can use
this feature, you must first register the Group number (see ÔStoring a
Number for One-Touch DialingÕ on page 2.27), and then store the
registered Group number into an empty One-touch button.
1. Press and hold the One-touch button that you want to assign (01
through 20) for 2 seconds.
2. Enter the 2-digit Group number, then press Enter . The group
number is stored in the selected one-touch button, and the display
asks you to enter one-touch button for another group dial if you
wish.
3. If you want to store another One-touch Group Dial numbers, repeat
steps 1-3. If you want to return to Standby mode, press Stop .
Sending a Fax Using Group Dialing
(Multi-Address Transmission)
You can use Group Dialing for Memory Transmission, or Delayed
Transmission.
Follow the procedure of the desired operation (Memory Transmission -
p. 2.14, Delayed Transmission - p. 2.12). When you come to a step in
which the display requests you to enter the remote fax number, press
the one-touch button to which you stored the group number. You can
use only one group number at one operation. Then continue the
procedure to complete the desired operation.
Your machine automatically scans the document loaded in the
document tray into memory, and the machine will dial each of the
numbers included in the Group.