Samsung SF-5800P - Manual (Page 43)

2.10
Sending a Fax
Sending a Fax Automatically
1. After loading a document, enter the number of the remote fax
machine using the number keypad.
You can store one-touch or speed dial numbers so that you can dial
your most frequently used numbers with one touch of a button or 2-
digit speed dial number. For information on storing and using
numbers in memory, see page 2.27.
If you make a mistake while entering a number, move the cursor
under the wrong digit by using
à or ¨, and correct the number or
press Delete to delete the number.
2. Press Start when the number appears correctly in the display. The
machine dials the number and begins to transmit.
Canceling Transmission
Press Stop any time during transmission. The machine continues to
send the fax and the display shows a message warning you that the
machine is in use. Press
Stop again.
Confirming Transmission
When the last page of your document has been sent successfully, the
machine beeps and returns to Standby mode.
If something went wrong during your fax transmission, an error
message appears in the display. For a listing of error messages and their
meanings, see page 3.6.
If you receive an error message, press Stop to clear the message and try
to send the document again.
You can set your machine to print out a confirmation report
automatically each time sending is completed. For more information,
see `User OptionsÕ on page 2.38.