Sony Ericsson P908 - Manual (Page 158)

158 Control panel
This is the Internet version of the user’s guide. © Print only for private use.
Up account with your network operator you can increase the
speed of your connection by making settings on the
Speed tab
under Advanced .
Tip To avoid having to change the phone number when you
travel abroad: enter the international dialling prefix (for
example '+') and the appropriate country/region code for your
ISP.
For some accounts you may also need to make advanced
settings.
Select Advanced and enter settings on the tabs as described
below
Dial-Up and High-Speed Dial-Up Advanced tabs
Log in The settings on this tab deal with IP and DNS addresses.
For an explanation of these settings, see
Log in in the
‘GPRS Advanced tabs’ on page 156.
Script As an alternative to entering your username and password
to access the Internet you may need to use a login script
stored on your P908. Although uncommon, scripts may
be required by your Internet Service Provider (ISP).
Select the
Use log in script check box and enter the script
text in the Script editor
If you select the check box Plain text authentication
(required by some ISPs), the security of your connection
will decrease during the connection process. Once you
are connected, the security of your connection will be
restored.
Select the check box Post connect terminal if:
• The login script of the account that you are setting up
requires that you input certain information or you will
need to respond to prompts from the Internet accounts.
You are connecting to a Dial-Up account that uses Secure
Access generated by a separate smart card or password
generator.
Proxy For an explanation of these settings, see Proxy in the
‘GPRS Advanced tabs’ on page 156.
Speed You can only increase the speed of your connection if you
have a High-Speed Dial-Up account with your network
operator.
Secure To enable secure access for this Internet account you
must link it to a vendor-associated Secure Token in this
dialogue:
1. Select the
Enable secure access check box.
To create or delete Secure Tokens on your P908, select
Control panel > Other >Secure tokens .
2. Select the vendor and token names of the Secure Token
that you want to link to this account from the drop-down
lists.
Other If your Internet Service Provider (ISP) supports Point to
Point Protocol (PPP) extensions, you can select the
Enable PPP extensions check box. PPP extensions allow
your P908 to provide features such as encryption, which
increases the security of your Internet connection.
Dial-Up and High-Speed Dial-Up Advanced tabs