Sony Ericsson P908 - Manual (Page 138)

138 Connecting to other devices
This is the Internet version of the user’s guide. © Print only for private use.
To let another device initiate pairing with your P908
1. In Control panel > Connections > Bluetooth > Settings , set
Operation mode to On .
2. Follow the other device’s manual to initiate pairing.
3. When asked for a passcode, enter the same on both devices.
4. If in the future you want to allow a paired device to connect
to your P908 without you explicitly approving each
connection you should select
Control panel > Connections >
Bluetooth > Devices, select a device and the check box Allow to
connect without confirmation .
Tip You can change the name of a paired device. When you pair
with other Bluetooth wireless technology enabled phones, it is
very useful to include the user's name as part of the device
name. This will make it very easy to beam information to the
desired recipients.
To let a headphone initiate pairing with your P908
1. Check that the device you want to pair with your P908:
– Is on and within range.
– Has its Bluetooth function activated and that it is in
visible mode.
2. In Control panel > Connections > Bluetooth > Settings , set
Operation mode to On .
3. Follow the headphone’s manual to initiate pairing on the
headphone.
4. In the Devices tab tap Add . Your P908 searches for all devices
in the vicinity and lists them.
5. When asked for a passcode, enter the headphone’s passcode
on your P908.
6. If in the future you want to allow the headphone to connect to
your P908 without you explicitly approving each connection,
you should select
Control panel > Connections > Bluetooth >
Devices , select the headphone and the check box Allow to
connect without confirmation .
To remove a paired device from your P908
Select a device in the list and select Remove .
Passcodes
Passcodes ensure that the device you pair with really is the
device you think it is. A passcode is a set of numbers and/or
letters (at least four characters) that you agree to exchange with
the owner of the other device. Simply agree a passcode with the
other user and each enter the same code into both devices when
asked for it. The actual code is up to you; the important thing is
that you both enter the same code. Accessories like headsets
often have a default passcode, usually ‘0000’, see the specific
user guide.