Starting after long term storage – Snapper 1300 Series User Manual

Page 25

11. Transport the rider to a suitable, dry, indoor location.

If the rider is to be stored 6 months or longer, block

the rider up off the wheels to relieve weight and also

to keep the tires off a damp floor. Protect tires from

prolonged exposure to direct sunlight.

2. Install the battery if it was removed.

3. Unplug the exhaust outlet and air cleaner.

4. Fill the fuel tank with fresh gasoline. See engine

manual for recommendations.

STARTING AFTER
LONG TERM STORAGE

Before starting the rider after it has been stored for a
long period of time, perform the following steps.

1. Remove the blocks from under the rider.

5. Check crankcase oil level and add proper oil if

necessary.

6. Inflate tires to proper pressure. Check fluid levels.

7. Start the engine and let it run slowly. DO NOT run at

high speed immediately after starting. Be sure to run
engine only outdoors or in well ventilated area.