Samsung LW-46G15 W - Manual (Page 67)

English - 67
Programming the Remote Control for Other Components
Your TV comes equipped with a universal remote control. In
addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box (CATV), DVD player, and Set-Top
Box made by Samsung (even if your VCR, Cable box, and DVD
player are made by manufacturers other than Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players, and Cable boxes.
1 Turn off your VCR (Cable box or DVD player).
2 Press the SELECT button to switch the remote control to the VCR
(CATV or DVD) mode.
➢
The remote control has five modes : TV, VCR, CATV, DVD,
and STB.
3 Press the SET button.
4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on
the next page for your VCR (Cable box or DVD player).
Example: To enter code “6”, press 0, 0, and 6.
To enter code “76”, press 0, 7, and 6.
5 Press the POWER ( ) button. Your VCR (Cable box or DVD
player) should turn on. If it turns on, your remote control is now set
correctly.
➢
If it does not turn on, repeat the steps above, but try one of
the other codes listed for your particular brand.
6 Once your remote control is set up, press the SELECT button any
time you want to use the remote control to operate the VCR
(Cable box or DVD player).
➢
◆ When your remote control is in VCR, CATV, DVD, or STB
mode, the volume buttons still control your television’s
volume.
◆ When your remote control is in TV mode, the VCR or
DVD player control buttons (backward, stop, play/pause,
and fast forward) still operate your VCR or DVD player.
VCR
BN68-00746A(GAIA2_Euro_ENG) 2004/08/23 03:56 PM Page 67