Sharp AQUOS BD-HP70U - Manual (Page 47)

Switching the Angle
DVD VIDEO BD VIDEO
If multiple angles are recorded, you can switch
between them.
Press ANGLE during playback.
The display indicates the angle number currently being
played back. Each time you press ANGLE, the angle
switches.
“–” is displayed if a disc is recorded with only one angle.
1
To return to the previous angle, press ANGLE to cycle
through the angles until you return to the original angle.
NOTE
The displayed items vary depending on the disc.
If you access the Function Control screen during playback
of a BD/DVD video, it may be impossible to operate the
BD/DVD video playback. In cases like this, close the
Function Control screen.
The operation of angles differs according to each disc. You
may need to refer to the operation manual of the disc.
The display for angle information automatically disappears
after 5 seconds. •
•
•
•
•
•
Displaying the Angle Mark
DVD VIDEO BD VIDEO
You can change settings so that Angle Mark appears
in the right bottom part of the screen when multiple
angles are recorded. The settings can be changed in
“Settings” – “Playback Setting” – “Angle Mark Display”
(Page 51).
Playback Functions
45
Playback