Sharp AQUOS BD-HP70U - Manual (Page 17)

Video Connections
Connecting to the HDMI Terminal
You can enjoy high quality digital picture and sound through the HDMI terminal.
See page 62 for information on the output of next generation audio formats.
When you use AQUOS LINK, make sure to use a certified HDMI cable. •
•
•
This Player
Equipment with an HDMI terminal
NOTE
Audio transmitted in DTS-HD High
Resolution Audio and DTS-HD Master
Audio formats is output from the
HDMI terminal as Bitstream. Connect
an amplifier with a built-in decoder to
enjoy the fine sound quality. •
When using an HDMI output, 7.1 ch
Digital Output is available. •
Selecting the priority video output when
connecting HDMI and Component video
When you connect both an HDMI cable and a
component cable to this player, you need to select
the priority video output in “Settings” – “Audio Video
Settings” – “Video Out Select”. (See page 49.)
NOTE
When you connect the player to a SHARP TV with an
HDMI cable only and the TV is turned on, the video output
switches to HDMI automatically. (The above setting is
unnecessary.)
When you connect the player to a TV with an HDMI cable,
“HDMI Video Out” is set to “Auto”. If you don’t get a stable
image, select the desired resolution*.
When you set “HDMI Video Out” to a setting other than
“Auto”, you can only select resolutions* that are compatible
with the connected TV.
Refer to “HDMI Video Out” on page 49 regarding the
resolutions of the HDMI video output. •
•
*
15
Connection
HDMI cable
(commercially available)
1
2
To HDMI OUT
terminal
To HDMI IN
terminal
TV
Projector AV receiver
STEPS
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an HDMI cable (commercially available) to the HDMI terminals (
1 and 2).
1
2
After connecting
If desired, connect audio equipment. (Page 18)
If necessary, perform the Audio Video Settings. (Pages 49–50)
Refer to AQUOS LINK function. (Pages 24 and 51)
Prepare the desired disc or content and start playback. (Pages 27–41) •
•
•
•