Sharp AQUOS BD-HP70U - Manual (Page 22)

Broadband Internet Connection
Internet Connection (Wireless LAN)
By connecting this player to the Internet, you can enjoy a variety of content on your TV using BD-LIVE functions,
the RSS reader function, Netflix, YouTube and also perform software updates.
You can connect to a network using the wireless LAN adapter and a wireless router/access point. •
•
After connecting
Perform the communication settings. (Pages 53–56)
When enjoying online services (BD-LIVE, RSS, Netflix, YouTube), refer to BD-LIVE functions (pages 29–30
and 52), the RSS reader function (page 25), Netflix (pages 36–37) or YouTube (pages 38–41).
To update the software via the Internet, perform Software Update Settings. (Pages 58–59) •
•
•
STEPS
Be sure to turn off this Player and the equipment before making any connections.
Insert the wireless LAN adapter (supplied) into the USB1 (Recommanded USB Port) or USB2 terminal. 1
2
This Player
When a wireless connection
is made, it is necessary to
enter the MAC address shown
on the wireless LAN adapter
for the wireless router. We
recommend writing down the
MAC address in this operation
manual. (See page 55.) •
20
Example of
a Broadband Internet Connection
Wireless LAN adapter
(supplied)
Internet Modem
Wireless router/
access point
PC
When an Internet connection is made, wired and
wireless connections cannot be used at the same time.
Use only one of the connection types (See page 53).
It is recommended that the wireless LAN adapter be
connected to the USB1 terminal on the rear of this
player. (When you insert or remove a wireless LAN
adapter, be sure to turn the main power off and make
sure that “Quick Start” is set to “No” (See page 51).)
When using the wireless LAN adapter in the rear USB1
terminal, insure that no video/audio cables or other
AC power cords are placed close to or on the wireless
LAN adapter as this may interfere with the wireless
LAN signal strength and limit LAN connection quality.
Try to provide as much free space around the device
for best performance. If this is not possible, insert the
adapter into the USB2 terminal on the front side.
CAUTION
When using a broadband Internet connection, a contract
with an Internet service provider is required. For more
details, contact your nearest Internet service provider.
Refer to the operation manual of the equipment you have
as the connected equipment and connection method may
differ depending on your Internet environment. •
•
NOTE
You must use a wireless router/access point that supports
IEEE802.11 b/g/n. (n is recommended for stable operation
of the wireless network.)
Wireless LAN, in its nature, may cause interference,
depending on the usage conditions (access point
performance, distance, obstacles, interference by other
radio devices, etc.).
Set the wireless router/access point to Infrastructure mode.
Ad-hoc mode is not supported.
SHARP cannot guarantee that wireless LAN adapters other
than the supplied adapter will operate with this player.
SHARP cannot guarantee that all brands’ wireless routers
will operate with this player. •
•
•
•
•
•
•
•