Sharp DV-MX1U - Manual (Page 9)

S
ETUP
– 9 – EN
Connection to an Audio System
AUDIO
This unit
Method 1 Method 2
Dolby Digital decoder, DTS decoder,
MD deck or DAT deck
(Analog) AUDIO OUT
L
Y
R
A
UDIO OUT
VIDE
O
OUT
DIGIT
AL
A
UDIO OUT CO
AXIAL
L R COAXIAL
L
Y
R
AU
D
IO
OUT
VIDEO
OUT
DIGIT
AL
A
UDIO OUT
CO
AXIAL
DIGITAL AUDIO OUT
Coaxial digital
audio cable
(commercially available)
Analog audio
input jacks
Stereo system
Audio cable
(supplied)
Setting
Connection
SETUP > (QUICK) >
DOLBY DIGITAL DTS
Connecting to Stereo System. DPCM OFF
* To complete these settings, refer to pages 16, 18.
Hint
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• AUDIO OUT jacks are not available on the DTS audio.
C Digital Connection to Audio Equipment or MD deck without a Dolby Digital Decoder
• Audio CD
Audio CDs can be transferred digitally to other equipment such as
an MD deck or DAT deck, play the disc as you would normally with
the connection shown above. Audio CDs recorded in the DTS for-
mat cannot be transferred digitally or via analog.
• Some Audio CDs have a short silent section between musical tracks.
When sound from discs such as these is digitally recorded by con-
necting the unit directly to a digital recorder (such as an MD deck or
DAT deck), the music may be recorded continuously and track num-
bers may be lost.
• DVD
DVDs recorded in Dolby Digital 5.1 channel surround sound or DTS
cannot be connected digitally to external recording equipment
such as an MD deck or DAT deck.
It may be possible to record “Dolby Digital” via a digital connection
if the unit’s output is set to “DPCM” (see page 18 “AUDIO Setting”).
Analog recording is possible but not for DTS recorded audio.
Setting
Connection
SETUP > (QUICK) >
DOLBY DIGITAL DTS
Connecting to a Dolby Digital
or DTS decoder for Dolby
Digital or DTS audio output.
BITSTREAM
Connecting to the other
equipment (an MD deck or
DAT deck etc.) without Dolby
Digital decoder.
DPCM OFF
* To complete these settings, refer to pages 16, 18.
Hint
• The audio source on a disc in a Dolby Digital 5.1 channel surround
format cannot be recorded as digital sound by an MD or DAT
deck.
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• By hooking this unit up to a Multi-channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital 5.1 channel surround
sound as heard in the movie theatres.
• By hooking this unit up to the DTS decoder, you can enjoy 5.1
channel surround system which reproduces the original sound as
truthfully as possible. 5.1 channel surround system is developed
by the Digital Theater System Inc.
Rear Terminals
LC
R / P
R
C
B / P
B
Y
R
A
UDIO OUT
VIDEO OUT
COMPONENT VIDEO OUT
S-VIDEO
OUT
DIGIT
AL
A
UDIO OUT CO
AXIAL
5
4
3
2
1
1. DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio cable
here through the coaxial digital audio input
jack of a decoder or audio receiver.
2. AUDIO OUT jacks
Connect the supplied audio cable (red/white)
here through the audio input jacks of a TV or
other audio equipment.
3. VIDEO OUT jack
Connect the supplied video cable (yellow) here
through the TV’s video input jack.
4. COMPONENT VIDEO OUT jacks
Connect an optional component video cable
here through the component video input jacks
of TV.
5. S-VIDEO OUT jack
Connect an optional S-video cable here
through the S-video input jack of a TV.
E61U1UD_1.indd 9 E61U1UD_1.indd 9 8/8/2005 11:50:15 AM 8/8/2005 11:50:15 AM