Sanyo HDMI VPC-FH1GX - Manual (Page 154)

133
English
INTRODUCTION TO THE OPTION SETTING MENU
2
Select the desired setting, and press the SET button.
h The screen to change the parameter for the selected setting appears.
NTSC: Outputs NTSC video signals.
PAL:
Outputs PAL video signals.
4:3: Use this setting when a TV having an aspect ratio of 4:3 is
connected.
16:9: Use this setting when a TV having an aspect ratio of 16:9 is
connected.
AUTO: The output signal is automatically set to match the mode in
which the video clip was recorded.
1080p: Choose this setting if the video was recorded in the e or
Y mode.
720p: Choose this setting if the video clip was recorded in the &
mode.
1080i: Choose this setting if the video clip was recorded in the !
mode.
480p: Choose this setting if the video clip was recorded in the )
mode.
h Does not work with 480i connector.
ON: Sets the HDMI-CEC function to “ON”.
OFF: Sets the HDMI-CEC function to “OFF”.
1080p: Choose this setting if the video was recorded in the e or
Y mode. (Also, choose this setting if your TV is equipped
with a 1080p connector.)
720p: Choose this setting if the video clip was recorded in the &
mode. (Also, choose this setting if your TV is equipped with a
720p connector.)
1080i: Choose this setting if the video clip was recorded in the !
mode. (Also, choose this setting if your TV is equipped with a
1080i connector.)
480p: Choose this setting if the video clip was recorded in the )
mode. (Also, choose this setting if your TV is equipped with a
480p connector.)
h Does not work with 480i connector.
h Select the setting that matches the mode in which the video clip
was recorded. However, your TV may not support the recorded
mode, so please refer to the specifications for the TV type
indicated in parentheses.