Sharp MD-MX10H - Manual (Page 14)

13
CONVENIENT CD AND MINIDISC OPERATIONS
1
Load a disc and begin playback.
2
Hold the MD/CD
2 2 2 2 2
button down for audible fast for-
ward, and hold the MD/CD
3 3 3 3 3
button down for audi-
ble fast reverse.
3
Normal playback will resume when the button is re-
leased.
Notes:
● When the end of the last track is reached, "END" will light,
and the unit will pause.
If you want to listen to a portion of a track again, press the
MD/CD
3
button to return to the point in the track you
want to listen to.
● If the beginning of the disc is reached whilst reviewing, play-
back will start automatically.
To search very quickly:
When fast forward or fast reverse is used whilst in the pause
mode, the playback point will move more quickly than when
using audible fast forward or audible fast reverse playback.
● In this mode, no sound is heard. Therefore, you should re-
fer to the time display.
● When you lift your finger, the unit will re-enter the pause
mode.
To listen again to the track being played:
(Main unit operation)
Turn the jog dial anti-clockwise during playback.
(Remote control operation)
Press the CD
5 5 5 5 5
or MD
5 5 5 5 5
button for less than 0.5 sec-
onds during playback.
To move to the beginning of the next track:
(Main unit operation)
Turn the jog dial clockwise during playback.
(Remote control operation)
Press the CD
4 4 4 4 4
or MD
4 4 4 4 4
button for less than 0.5 sec-
onds during playback.
● To skip a number of tracks at one time, turn the jog dial on
the main unit or press the CD
5
/
4
or MD
5
/
4
button on the remote control repeatedly until the desired
track number is shown.
● To start continuous playback from a desired track, select
the track number by turning the jog dial on the main unit, or
by pressing the CD
5
/
4
or MD
5
/
4
button on
the remote control, whilst in the stop mode. Then, press
the CD
06
or MD
06
button.
jog dial
MD
06
CD
06
MD
5
CD
5
MD
4
CD
4
■ APSS (Auto Program Search System)
MD
3
CD
3
MD
2
CD
2
■ Cue and review
MD
06
CD
06
MD/CD
3
MD/CD
2