Siemens DOME COLOUR CFMC1315-LP - Manual (Page 48)

Configuration
48
Siemens Building Technologies
Fire Safety & Security Products 01.2009
7.7 Date/Time
z Display
Check “ON” to display date/time on screen; the position and colour can be set
on the camera OSD menu.
z Synchronization mode
– Manual:
Input the date and time to set up system time.
– NTP:
You can also enable Network Time Protocol (NTP) by NTP server. Input a
host name for NTP server, select time adjustment period, and click the “save
and test” button to start testing NTP function.
– Synchronization from PC:
System date/time can be synchronized from PC setting.
z Daylight
Select ON to active Daylight-saving function if you are in Daylight-saving time
zone (effective for NTP mode only).