Siemens DOME COLOUR CFMC1315-LP - Manual (Page 45)

Configuration
45
Siemens Building Technologies
Fire Safety & Security Products 01.2009
7.5.4 NAS recording
This is a method to store data on a network-based storage device.
3. Choose record condition:
Select the condition for NAS recording: recording by Schedule, Alarm or
Motion
to trigger the recording session.
If Schedule mode is selected, the data can be stored on the NAS storage in
JPEG format only, however both JPEG and MPEG format are available for
Alarm
and Motion conditions.
4. After the recording condition has been selected, the corresponding detailed
recording field appears. There you can select further conditions which you
need to complete the record condition setup.
5. Select NAS mode, two modes – NFS and CIFS – are available.
NFS
is for network storage device operating in UNIX systems
CIFS is for Windows systems.
6. Fill in the storage device’s address, the user ID, password, data path where
the data is to be stored in the Server, User ID, Password and Path fields,
respectively.
7. Click the “SAVE” button to complete the NAS setup procedure.