1 ope ra tion 6, 1 ope ra ting ele ments 6, 1 ope ra ting keys 6 – Samson 5476 User Manual
Page 6: Chan geo ver key 6, En ter key 6, Ope ra ting ele ments 6, Re set key 6, Operation, Operating elements, Operating keys
1
Operation
The controller is ready for use with the temperatures and operating schedules preset by the
manufacturer.
On start-up, the current time and date need to be set at the controller (–> section 1.5).
1.1
Operating elements
The operating controls are located in the front panel of the controller and protected by a Plexi-
glas door.
1.1.1 Operating keys
Changeover key
– Press to switch between operating level and configuration level and from
configuration level to the parameter level
Reset key
Press to reset accessible parameters to their default settings; the controller
must be in the parameter level
Arrow keys
– To scroll within levels
– To change values
– To switch from the parameter level into the configuration level
(press both arrow keys simultaneously)
Enter key
– To access levels
– Access parameters and functions to edit them
– Confirm settings
– Display set points in the info level
6
EB 5476 EN
Operation