Samson 5476 - Manual (Page 11)

1.5 Setting the controller time
The current time and date need to be set immediately after start-up and after a power failure
lasting longer than 24 hours.
The time is set in the parameter level.
Proceed as follows:
Switch to the parameter level.
Display: Time,
blinks
Activate editing mode for the controller time.
blinks.
Change controller time.
Confirm controller time.
Display: Date (day.month)
Change date setting.
Confirm date.
Display: Year.
Change year setting.
Confirm year.
Return to the operating level.
Note!
The controller automatically returns to the operating level if the keys are left unpressed for five
minutes.
EB 5476 EN
11
Operation
0 1
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24