Samsung CLX-3160 - Manual (Page 51)

9.7
Adding pages to a delayed fax
You can add pages to the delayed transmissions previously reserved in
your machine’s memory.
1 Load the originals to be added and adjust document settings.
2 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
3 Press OK when Add Page appears.
4 Press the Scroll buttons until the fax job you want appears and
press OK.
The machine scans the original into memory and shows the total
number of pages and the number of the added pages.
Canceling a delayed fax
1 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
2 Press the Scroll buttons until Cancel Job appears and press OK.
3 Press the Scroll buttons until the fax job you want appears and
press OK.
4 Press OK when Yes appears.
The selected fax is deleted from memory.
Sending a priority fax
Using the Priority Fax feature, a high priority fax can be sent ahead of
reserved operations. The original is scanned into memory and
immediately transmitted when the current operation is finished. In
addition, priority transmission will interrupt a Multiple Send operation
between stations (i.e., when the transmission to station A ends, before
transmission to station B begins) or between redial attempts.
1 Press Fax.
2 Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3 Adjust the document resolution and darkness to suit your fax
needs. See page 9.1.
4 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
5 Press the Scroll buttons until Priority Send appears and press
OK.
6 Enter the number of the receiving machine.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details, see page 10.3.
7 Press OK to confirm the number.
8 Enter the job name you want and press OK.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
9 If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine shows the number being dialed and begins sending
the fax.
Forwarding faxes
You can forward your incoming and outgoing faxes to another fax
machine or email address.
Forwarding sent faxes to another fax machine
You can set the machine to send copies of all outgoing faxes to a
specified destination, in addition to the fax numbers you entered.
1 Press Fax.
2 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
3 Press the Scroll buttons until Forward appears and press OK.
4 Press OK when Fax appears.
5 Press the Scroll buttons until Send Forward appears and press
OK.
6 Press the Scroll buttons to select On and press OK.
7 Enter the number of the fax machine to which faxes are to be sent
and press OK.
8 Press Stop/Clear to return to Standby mode.
Subsequent sent faxes will be forwarded to the specified fax
machine.
Forwarding sent faxes to email address
You can set the machine to send copies of all outgoing faxes to a
specified destination, in addition to the email address you entered.
1 Press Fax.
2 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
3 Press the Scroll buttons until Forward appears and press OK.
4 Press the Scroll buttons until E-mail appears and press OK.