Sanyo CLT-5812 - Manual (Page 44)

E42
ADDITIONAL
INFORMATION
Suggestion
• Make sure the battery pack is connected to
the handset and fully charged.
• Make sure the other handset is not already in
use. Both handsets cannot be in talk mode at
the same time.
• Place the handset in the base for at least 5
seconds to re-register to the base.
• Make sure the handset is not too far from the
base when trying to use.
• Re-register both handsets (see page E9).
• Make sure that you have registered the
second handset.
• Only one handset at a time can talk with an
outside caller. To allow the other handset to
talk to the caller, transfer the call.
Symptom
Handset No.1 or
No.2 is not
working.
Unavailable
message is
displayed on the
LCD screen of the
handset.
The handset
doesn’t
communicate with
the base or the
other handset.
No 3-way
conversation.
UP016DH(CLT5812) ENG OM 3/7/05 5:23 PM Page 42