Sanyo CLT-5812 - Manual (Page 27)

E25
DIRECTORY
Memory dialing from Standby Mode
1
Press the MEM key. The handset displays
your programmed memory locations.
2
Press the VOL/RING or VOL/RING
key, or enter the number (0 - 9) to select the memory location
you would like to dial.
3
Press the TALK/FLASH key. ¨ Connecting ¨
and the number you would like to dial
appear on the display. Then the displayed
number is dialed.
Making calls with memory dialing
Select Memory
01 SANYO
02 Alison
Connecting
9057609944
• If you press the SELECT/CH key before the TALK/FLASH key, you can
confirm the name and the number stored in the selected memory location.
• Whenever you are using a memory menu screen, you must press a key within
30 seconds or the phone will return to standby.
• To exit the memory function without dialing, press the END key. The handset
returns to standby mode.
Notes:
Memory dialing from Talk Mode
1
Press the TALK/FLASH key. ¨ Connecting ¨ appears.
2
After the display changes from “ Connecting ” to “ Talk ”,
press the MEM key.
3
Press the VOL/RING or VOL/RING
key, or enter a number (0 - 9) to select the
memory location of the desired phone
number. If you press the SELECT/CH key,
the number is dialed.
4
To hang up, press the END key.
Connecting Talk
Volume High
Select Memory
01 SANYO
02 Alison
Talk 0:35
9057609944
UP016DH(CLT5812) ENG OM 3/7/05 5:22 PM Page 25