Sanyo CLT-5812 - Manual (Page 43)

E41
ADDITIONAL
INFORMATION
Suggestion
• Re-register both handsets (see page E9).
• The battery pack may be weak. Charge the
battery for 15-20 hours.
• The handset may be too far away from the
base unit.
• Place the base unit away from appliances or
metal objects.
• Check the battery pack to ensure that there is a
secure connection.
• Make sure ringer volume isn’t “OFF”.
• Charge the handset.
• Keep the handset away from microwave
ovens, computers, remote control toys,
wireless microphones, alarm systems,
intercoms, room monitors, fluorescent lights,
and electrical appliances.
• Move the base to another location or turn off
the source of interference.
• The handset was picked up before the
second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify
your Caller ID service is current.
• Contact your local telephone company to
make sure that your telephone receives FSK
message signaling.
Symptom
The handset
doesn't ring or
receive a page.
Severe noise
interference.
The Caller ID
does not display.
Voice Message
Indication does
not work.
UP016DH(CLT5812) ENG OM 3/7/05 5:23 PM Page 41