Sony AT107 - Manual (Page 121)

121
Se
tti
n
gs an
d Adj
u
st
m
e
n
ts
AFT
• If the Auto Fine Tuning function does not
work effectively, select “Off” and press m
to select “Level.” Press
clearer picture, and press ENTER.
Sound System
Select an available TV system (page 120).
Name
Changes or enters a new station name (up to
5 characters). The recorder must receive
programme position information (e.g.,
SMARTLINK information) for station
names to appear automatically.
Press
,, then press
select a character.
To change the characters, press
M/m to
move the cursor, and press
Decoder
Sets the external decoder (PAY-TV/Canal
Plus analogue decoder) channels.
For details, see page 33.
After the programme positions have been
set, you can change the order of each
programme position in the display list.
1
Press M/m to select the programme
position number you want to swap, and
press
,.
• To display other pages, press ./
> repeatedly.
2
Press M/m to select the programme
position number to swap for the one
selected in step 1, and press ENTER.
The programme position numbers are
swapped.
• To swap the programme position
number of another station, repeat from
step 1.
S25 CC28 331.25–339.25
S26 CC29 339.25–347.25
S27 CC30 347.25–355.25
S28 CC31 355.25–363.25
S29 CC32 363.25–371.25
S30 CC33 371.25–379.25
S31 CC34 379.25–387.25
S32 CC35 387.25–395.25
S33 CC36 395.25–403.25
S34 CC37 403.25–411.25
S35 CC38 411.25–419.25
S36 CC39 419.25–427.25
S37 CC40 427.25–435.25
S38 CC41 435.25–443.25
S39 CC42 443.25–451.25
S40 CC43 451.25–459.25
S41 CC44 459.25–467.25
On Turns on the Auto Fine
Tuning function.
Normally select this position.
Off Allows you to adjust the
picture manually.
Corre-
sponding
channel
Channel
Set
number
Receivable
Frequency
range (MHz)
B/G Select this when in West
European countries, except
those listed in “Receivable
channels” on page 120.
D/K Select this when in East
European countries.
I Select this when in Great
Britain/Ireland.
L Select this when in France.
Channel Swapping