Sony MZ-N10 - Manual (Page 55)

55
Moving a track in a disc with
group setting
You can move a track from one group out
of the group or to another group. You can
also move a track that does not belong to a
group to an existing group.
1
While playing the track you want to
move, press the jog dial.
2
Turn the jog dial until “EDIT”
appears in the display, and then press
the jog dial.
The recorder plays the selected track
repeatedly.
3
Turn the jog dial until “Move”
appears in the display, and then press
the jog dial.
4
Turn the jog dial until “ : Move”
appears in the display, and then press
the jog dial.
5
When moving a track out of a group,
skip this step.
When moving a track to a different
group, turn the jog dial until the
destination group appears in the
display, and then press the jog dial.
If the group has been labeled, press
the control key towards > to
display the group name. Press the
control key towards . to return to
the group number display.
6
Turn the jog dial until the destination
track number (the track number
within a group if the destination is a
different group) appears in the
display, and then press the jog dial to
enter your selection.
The selected track number appears in
the middle row of the display.
If the track has been labeled, press the
control key towards > to make the
track name appear in the display.
Press the control key towards . to
return to the track number display.
To cancel moving
Press x for 2 seconds or more.
To return the preceding
setting
Press x.
For the remote control operation, see
page 70.
1 4 1 2 3 3 1 2 4 3 5 6 2
1 4 1 2 3 3 2 5 4 5 1 2 3
Group 1 Group 2
Group 2 Group 1
Moving track number 2 in
group 1 to track number 3 in
group 2
Group 3
Group 3
Disc
Disc
5-way control key
(., >)
Jog dial