Sony MZ-N10 - Manual (Page 51)

51
Recording a track to an
existing group
You can add a track to an existing group.
1
Press GROUP and press the control
key towards . or > until the
group you want to add a track to
appears in the display.
2
While pressing GROUP, press and
slide zREC.
3
Play the source sound.
z
• To add a track that is currently playing to a
group, stop or pause playing the track first,
and then do the procedure from step 2.
• You can set the recorder to always create a
new group without pressing the GROUP
button. See page 63 for details.
Using the group
function when playing
The recorder can operate various
playback with a disc which has group
setting.
This section explains the operations that
are done on the remote control. For details
on operations done on the recorder, see
page 65.
Playing a track in group play
In group play, all groups are played in
order, starting with group 1, followed by
the unassigned tracks (“Group --”).
Playback stops after all the tracks have
been played.
1
While playing, press P MODE/
until “ ” appears in the display.
To cue to the start of a group
(Group Skip)
1 While playing, press + or –.
Pressing the – button cues to the first
track in the current group. Pressing the button
again cues to the first track of the previous
group.
+, –
P MODE/
Jog lever
(., >, ENT)