Savin 2518 - Manual (Page 15)

Facsimile Mode
9
1
Facsimile Mode
Changing to Facsimile Mode
You can always use the machine for
faxing when you are not using a scan-
ner.
A
Press the
{{{{Facsimile}}}} key.
The fax display appears on the
panel display.
Note
❒ The Memory Transmission/Re-
ception function is performed
automatically even when an-
other function is being used.
You need not to switch the dis-
play. When data is received in
memory, the Receive File indi-
cator is lit.
Reference
For details, see the Facsimile
Reference manual.
Sending a Fax
Sending a fax while copying
A
Press the
{{{{Facsimile}}}} key to switch
to the fax display.
Note
❒ When you press the {Facsimile}
key while scanning originals or
sorting in Copy mode, remove
any originals of your copy job.
B
Complete the usual operations
for sending a fax, then press the
{{{{Start}}}} key.
C
After the transmission has fin-
ished, press the
{{{{Copy}}}} key.
D
Reset the copy job originals, then
press the
{{{{Start}}}} key.
The machine resumes the inter-
rupted copy run.
Sending a fax while printing
A
Press the
{{{{Facsimile}}}} key to switch
to the fax display.
B
Complete the usual operations
for sending a fax, then press the
{{{{Start}}}} key.
Printing a Received Fax
When you are not copying, a received
fax is printed automatically. You do
not need to switch to Facsimile mode.
Note
❒ Machine operations are different
depending “11Print Priority” (See
P.16 “System Settings”) or “13Key
Op. Tools” (See P.16 “System Set-
tings”) settings.