Sony Cyber-shot DSC-N2 - Manual (Page 12)

12
4 Turning the camera on/setting the clock
1 Select with the mode switch, then press the POWER button.
2 Set the clock by touching the buttons on the screen.
1 Touch the desired date display format, then t. The Clock Set 2/2 screen appears.
2 Touch the item to be set, then set the numeric value with v/V.
3 Touch [OK].
[ To change the date and time
Select [Clock Set] in the (Setup) screen (page 20).
[ When you turn on the power
• Unless you set the clock, the Clock Set screen appears each time the camera is turned on.
• If the camera is running on battery power and you do not operate the camera for about three minutes, the
camera turns off automatically to prevent wearing down the battery pack (Auto power-off function).
POWER button
Mode switch
Touch panel