Woodstock SHOP FOX W1808 - Manual (Page 29)

-27-
W1808/W1809/W1810 Cyclone Dust Collectors
SE
T
U
P
Projectiles thrown from the machine
could cause serious eye injury. Wear
safety glasses during assembly and
operation.
Loose hair and clothing could get
caught in machinery and cause serious
personal injury. Keep loose clothing
rolled up and long hair tied up and
away from machinery.
Complete this process once you have familiarized yourself
with all the instructions in this manual .
To test run the cyclone dust collector, do these steps:
1. Read the entire instruction manual first!
2. Make sure all tools and foreign objects have been
removed from the dust collector.
3. Review Page 13, install the plug on the power
cord, and connect your dust collector to the power
source.
4. Flip the main power switch at the lower left hand
corner of the switch box.
5. Press the ON/OFF button to turn the machine ON.
— The dust collector should run smoothly with little
or no vibration.
— Immediately stop the dust collector if you suspect
any problems, and refer to Page 46 to trouble-
shoot/fix any problems before starting the dust
collector again.
— If the source of an unusual noise or vibration is
not readily apparent, contact our technical sup-
port for help at (360) 734-3482 or contact us
online at [email protected].
6. Press the TIMER button and cycle through each of
the times to make sure the lights illuminate the
switch.
7. Press the TIMER button on the remote control and
cycle through the times in the same manner as Step
6.
8. Press the ON/OFF button on the remote control to
make sure it is working properly.
Test Run