Siemens Hicom 300E - Manual (Page 42)

42
Settings
Setting the station
If your mobile unit is logged onto more than one station (systems ), you can
set it to a particular station or a "best station" (automatic station changeover).
Setting the station:
.
Press the menu key.
NE XT Scroll to
Search Station
and confirm – the current
S earc h s tation setting is displayed in the top line, e.g.
Station 1
O K (dimmed).
NE XT If necessary, scroll to the required station and confirm.
e.g.
B es t s tation
O K
Activating/deactivating automatic searches:
If you have set the mobile unit permanently to a station, you can also activate/
deactivate
Automatic Search.
If
Automatic Search
is activated (identified by a *, e.g.
Station 1
*), the
mobile unit searches for the default station for 30 seconds after switching it on
or leaving the radio range. If this station is not found, the mobile unit
automatically searches for another station.
Prerequisite:
You have selected a specific station as described above and confirmed with
O K . – The display shows:
Press O K to activate
Press NO to deactivate