Sony TTR1 - Manual (Page 68)

68
Appendix: Manual Network Configuration
iii . Enter the Gateway IP address for the
network .
iv . Enter the Primary DNS IP address for
the network .
v . Enter the Secondary DNS IP address
for the network, or leave blank if there
is none .
h. Enter your wireless network name (SSID) . Note that the SSID is case
sensitive . Turn the TUNE knob to scroll through the list of characters
and highlight each character . Press the
TUNE knob to select the highlighted
character and move to the next character .
If you make a mistake, turn the TUNE knob
to highlight BKSP and press the TUNE
knob to erase the character . When done,
turn the TUNE knob to highlight OK and
press the TUNE knob .
i. Select the authentication type, Open (no
key (password)), Pre-Shared key, WPA, or
WPA2 . Turn the TUNE Knob to highlight your
selection and press the TUNE knob . If you
have selected Open, skip ahead to step k .
j. Depending upon your selection, complete these additional steps:
• Pre-Shared Key:
i . Select whether the Pre-Shared Key has WEP encryption disabled or
SSID
BKSP
OK
CANCEL
0 123456789., ab
cdefghijklmnopq
rstuvwxyzABCDEF
GHIJKLMNOPQRSTU
Open
Pre-Shared Key
WPA
WPA2 >
Authentication
IP settings
IP address
. 0 . 0 . 0
Subnet mask
. 255 255 . 255 . 0
0