Sanyo VPC-E1090 - Manual (Page 39)

Capture Settings 27
The Capture Menu
English
P-Mode
The Focus Zone setting allows you to select the number of
zones the camera will focus on when taking a photo. Use the
UP/DOWN navigation buttons to select from the options and
press the OK button to enter. 3 settings for focus zone are
available:
• MULTI-ZONE (default)
• CENTER
• SELECTED AREA
EV Compensation
The EV Compensation menu allows you to adjust the
exposure or amount of light that enters the lens while
capturing photos or videos. Use this feature to lighten or
darken the image when the brightness between the subject
and background is not balanced or when the subject occupies
only a small part of the photograph. Use a positive (+) EV
compensation for spotlight subjects, especially against dark
backgrounds or scenes with low reflectivity, such as green or
dark foliage.
Use the UP/DOWN navigation buttons to modify the value. This setting can be modified
from -2.0 to +2.0 in a 0.3/0.4 increment/decrement.
AEB
See “Using the AEB (Auto Exposure Bracketing) Function” on page 21 for more details on
the setup menu options.
M-Burst Interval
The M-Burst Interval setting allows you to adjust the burst
interval when the multi-burst function is enabled. Use the UP/
DOWN navigation buttons to select from the options.
• 1/30 SEC (default)
• 1/15 SEC
• 1/7.5 SEC
MULTI-ZONE
CENTER
SELECTED AREA
FOCUS ZONE
+0.3EV
EV COMPENSATION
M-BURST INTERVAL
1/30 SEC
1/15 SEC
1/7.5 SEC