Sanyo VPC-E1090 - Manual (Page 30)

18 Camera Setup
Turning On
English
Turning On
Press and hold the POWER button to turn on the camera. To turn off the camera, press
the POWER button again.
First Time Use
Press the POWER button as described in “Turning On” on
page 18, a welcome screen displays momentarily on the LCD
screen.
If the camera is turned on for the first time, the Language
menu pops up automatically after powering on the camera.
Press the OK button and select the desired language by
UP/DOWN navigation buttons, then press the OK button to
confirm.
After the desired language is selected, the Date and Time
menu pops up. Press the OK button. Select each field and
adjust the value using the navigation buttons. Press the OK
button to confirm.
Note:
If the Date and Time is reset (when running out the battery and not in use for a long period), the
Date and Time setup screen displays automatically.
LANGUAGE
ENGLISH
DEUTSCH
FRAN
ç
AIS
ITALIANO
DATE & TIME
2009 / 02 / 01 12 : 00
(Year)
Press OK when done