Sanyo VPC-E1090 - Manual (Page 32)

20 Getting Started
Taking your First Photo
English
Using Macro Mode
Macro mode is designed for close-up photography and can capture all detail even when
your subject is very close to the camera. Press the LEFT/MACRO
navigation button.
The Macro icon displays on the LCD screen.
Macro mode range: 10-70cm(Wide)
35-70cm(Tele)
Setting the Flash Mode
You can choose from 4 flash modes to suit various lighting conditions.
Press the UP/FLASH /DELETE navigation button to scroll through the four
modes on the LCD screen. The flash setting remains the same for subsequent photos until
you change it as described above.
Using the Zoom in/out Function
The camera comes equipped with 3x optical zoom and 5x digital zoom that allows you to
zoom in on your subject.
To use the zoom:
1. Press the right side of the ZOOM button T to zoom in on your subject.
2. Press the left side of the ZOOM button W to zoom out from your subject.
Using the Self-timer and Burst Photography
The camera comes equipped with a self-timer which allows you to take photos after a pre-
defined delay. The burst photography feature allows you to take multiple consecutive
photos by pressing and holding the SHUTTER button. The multi-burst photography
feature allows you to take multiple (16) consecutive VGA photos by pressing the
SHUTTER button once.
Auto flash: The flash fires automatically when needed.
Flash off: The flash is turned off.
Fill flash: The flash always fires.
Anti Red-eye: The flash fires twice so as to reduce the red-eye effect.