Samsung SCH i830 - Manual (Page 164)

Sect
ion 12
164
5. Tap New. Your device searches for other Bluetooth
wireless technology enabled devices and displays them
in the list.
6. Tap the name of the other device you want, and then tap
Next.
7. Enter a Passkey, which should be between 1 and 16
characters, and tap Next.
Note: You must enter the same Passkey on both devices.
8. Change the name of the device associated with the bond,
if desired, and then tap Finish.
Accept a Bond
To accept an incoming bond, follow these steps:
1. Make sure that Bluetooth is turned on and the device is
discoverable.
2. When prompted to bond with the other device, tap Yes.
3. Enter a Passkey, which should be between 1 and 16
characters and must match the Passkey entered on the
originating device.
4. Tap Next.
5. Change the name of the device associated with the bond,
if desired, and then tap Finish.