Savin 2565 - Manual (Page 48)

Copying
38
2
Stapling position and original setting
Place all the originals in the automatic
document feeder (ADF) in the orien-
tation in which they can be read nor-
mally. When placing the original on
the exposure glass, keep the same ori-
entation, but set the original facing
downwards. When there is copy pa-
per that is identical in size and orien-
tation to your original, the staple
positions are as follows.
❖ ❖ ❖ ❖ Finisher 3000B(100–sheet staples)
*1 This table shows staple positioning.
The orientation of the paper does not
indicate direction of delivery.
*2 You cannot staple at this position
when copying onto A3 or A4 size pa-
per.
*3 If you want to staple at this position
on A3 or A4 size paper, select [Rotate]
and then select "Top 2".
❖ ❖ ❖ ❖ Finisher 3000M(50–sheet staples)
*1 This table shows staple positioning.
The orientation of the paper does not
indicate direction of delivery.
*2 You cannot staple at this position
when copying onto A3 or A4 size pa-
per.
*3 If you want to staple at this position
on A3 or A4 size paper, select [Rotate]
and then select "Top 2".
Original logation
Exposure
glass Document
Feeder
Stapling
position
Top
Top slant
Bottom
Left 2
Top 2
ZGVX090E
Original logation
Exposure
glass Document
Feeder
Stapling
position
Top
Top slant
Bottom
Left 2
Top 2