SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 78)

C HAPTER 7 | WLAN Configuration
Wireless Security Setup
– 78 –
W IRELESS S ECURITY S ETUP
Describes the wireless security settings for each VAP, including association
mode, encryption, and authentication.
Figure 39: Wireless Security Setup - None
C OMMON W IRELESS
P ARAMETERS
The following items are displayed all pages of the Wireless Security Setup:
◆ SSID TYPE — Selects the VAP to apply security settings to.
(Options: Root, VAP0)
◆ Encryption — Selects the encryption type to deploy on the specified
VAP. The options are:
■
None: No security.
■
WEP: WEP is used as the multicast encryption cipher. You should
select WEP only when both WPA and WEP clients are supported.
■
WPA(TKIP): WPA employs a combination of several technologies
to provide an enhanced security solution for 802.11 wireless
networks. TKIP is used as the multicast encryption cipher.
■
WPA2(AES): WPA2 – WPA was introduced as an interim solution
for the vulnerability of WEP pending the ratification of the IEEE
802.11i wireless security standard. In effect, the WPA security
features are a subset of the 802.11i standard. WPA2 includes the
now ratified 802.11i standard, but also offers backward
compatibility with WPA. Therefore, WPA2 includes the same 802.1X
and PSK modes of operation.
■
WPA2(Mixed): Clients using WPA or WPA2 are accepted for
authentication.
The following figures illustrate the various options available with each
security setting: