SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 109)

C HAPTER 9 | Administration Settings
Time Zone
– 109 –
◆ Add — Adds the ACL to the ACL Table.
ACL T ABLE
Lists the configured ACLs on both LAN and WAN ports, status and IP
address.
◆ Select — Highlights the ACL parameters for editing.
◆ State — Displays if the ACL is currently implemented or not.
◆ Interface — Displays if the ACL has been configured on the LAN port
or the WAN port.
◆ IP Address — Displays the allowed IP address.
T IME Z ONE
The Date/Time page allows you to manually configure time settings or
enable the use of an NTP server.
Figure 64: Time Zone and SNTP Configuration
The following items are displayed on this page:
◆ Current Time — Allows you to manually configure time settings for the
region that you are in.
◆ Time Zone Select — Allows you to select your current location or
nearest city. All time zones are given in Greenwich Mean Time (GMT).
◆ SNTP client update — Enables SNTP (Simple Network Time Protocol).
(Default: Disabled)
◆ SNTP server — Specifies an SNTP server in your region, or you may
manually enter the IP address of an SNTP server you know.