Step 2 - lan settings, Figure 11: wizard - step 2 - lan settings, 2 - lan s – SMC Networks BARRICADE SMC7901WBRA2 B1 User Manual
Page 39
C
HAPTER
3
| Initial Configuration
Wizard
– 39 –
■
1483 Router (IPoA) — Dynamic IP over ATM (IPoA).
■
1483 Bridged — The Bridged RFC 1483 Encapsulated Traffic over
ATM feature allows you to send bridged RFC 1483 encapsulated
packets over ATM switched virtual circuits (SVCs).
◆
Connection Type — Your connection type will also be specified by your
service provider. Choose from the following options:
■
VC-Mux — Virtual circuit multiplexing (VC-Mux).
■
LLC/SNAP — Logical Link Control (LLC).
◆
MTU — This is a preset field and does not require configuration. For
“Current ATM VC Table” on page 64
◆
VPI — This is a preset field and does not require configuration. For
“Channel Configuration” on page 59
.
◆
VCI — This is a preset field and does not require configuration. For
“Channel Configuration” on page 59
.
◆
Username — Enter the username provided by your service provider.
◆
Password — Enter the password provided by your service provider.
◆
Confirm Password — Re-enter your password.
◆
Next — Proceeds to the next step.
S
TEP
2 - LAN
S
ETTINGS
The Step 2 page of the Wizard configures the LAN connection type for the
ADSL Router.
Figure 11: Wizard - Step 2 - LAN Settings